D-Link Support Resources

v3.13b3 BETA

1. Fixs problem when two units are bridge and linked to APs like below:
AP ==> Bridge ---------- Bridge ==> AP
Wireless clients that move from one location to the other will now be able to access all networked devices.

======================================================================
v3.10

Shipped Firmware

v3.13b3 ROM

2000ap v3.13b3 nml rom.bin (1024 KB)

Download.

v3.13b3

2000ap v3.13b3 nml.bin (896 KB)

Download.

REV B

Software

v2.04

DWL-2000AP Manager v2.04.exe (1.64 MB)

Download.

SNMP

No SNMP Available.pdf (22.99 KB)

Download.

SetupGuides

No SetupGuides Available.pdf (23.05 KB)

Download.

ScreenCaptures

DWL-2000AP Screenies FW-1.7.pdf (1.22 MB)

Download.

QuickInstallGuide

DWL-2000AP QIG.pdf (2.75 MB)

Download.

Manuals

v1.02

DWL-2000AP Manual v1.02.pdf (4.2 MB)

Download.

Firmware

D-Link DWL-2000AP release note

Version 2.05b4
1. fixed the SNMP settings not working after apply
2. add a warning message for MAC Filter
3. fixed AP client was unable to receive broadcast packages from AP
4. the Atheros wireless driver version is 2.0
5. the stack version is 1204

Version 2.05b3
1. updated wireless driver(super G)
2. the Atheros wireless driver version is 2.0
3. the stack version is 1204

Version 2.05b2
1. fixed low throughput with usb card
2. the Atheros wireless driver version is 1.14
3. the stack version is 1195

Version 2.05b1
1. fixed APC reconnect to AP every 6 minutes
2. fixed Wi-Fi A6 not pass
3. the Atheros wireless driver version is 1.13
4. the stack version is 1187

Version 2.04b5
1. fixed unable to connect with ORINOCO
2. the Atheros wireless driver version is 1.12
3. the stack version is 1187

Version 2.04
1. fixed when AP was in the AP client mode and the authentication was in the shared key,
AP client could not connect to other APs.
2. fixed TI card hangs per one minates bug.
3. fix DWL-650 compability issue
4. channel1 ~channel3 connect issue
5. the Atheros wireless driver version is 1.11
6. the stack version is 1185

Version 2.03
1. modified the WPA setting values
2. fixed the wireless light not working
3. the Atheros wireless driver version is 1.10
4. the stack version is 1180

Version 2.02
1. fixed WPA not working
2. the Atheros wireless driver version is 1.10
3. the stack version is 1175

Version 2.01
1. add WPA
2. modified SNMP's System description "D-Link 802.11b+ AP" to "D-Link 802.11g AP"
3. the Atheros wireless driver version is 1.9
4. the stack version is 1171

Version 2.00
1. fixed when the Remote Bridge MAC is set to "000000000000", AP will crash
2. add wireless domain for utility
3. reversion to 2.00
4. the Atheros wireless driver version is 1.9
5. the stack version is 1170

Version 2.00b4 (NEC & Brecis)
1. fixed AP client was unable to connect to AP.(Brecis)
2. fixed the DHCP end IP address incorrect.(Brecis)
3. fixed when changing LAN IP address to different network as the DHCP start IP address,
user will be unable to connect to AP
4. changed the default value of RTS Threshold to the correct default value "2432".
5. on the Advanced - Performance page, changed the default value of DTIM from "3" to "1".
6. add 11g Only Mode help information
7. the Atheros wireless driver version is 1.9
8. the stack version is 1166

Version 2.00b3 (NEC & Brecis)
1. fixed AP will crash after upgrading 2.00b1 firmware
2. the Atheros wireless driver version is 1.8
3. the stack version is 1164

Version 2.00b2 (NEC & Brecis)
1. on the Status/Device Info page, changed the format of LAN mac address as same as
Wireless mac address.
2. fixed AP will crash after upgrading 2.00b1 firmware
3. the Atheros wireless driver version is 1.8
4. the stack version is 1164

Version 2.00b1 (NEC & Brecis)
1. update the Atheros wireless driver 2.4.0.71
2. the Atheros wireless driver version is 1.8
3. the stack version is 1161

Version 2.00 (NEC & Brecis)
1. changed the range of Becon interval (20~1000)
2. changed the pre-shared key as dwl-2000 NEC
3. the Atheros wireless driver version is 1.7
4. the stack version is 1156

Version 1.5d (Brecis)
1. add Antenna Selection function
2. the Atheros wireless driver version is 1.6
3. the stack version is 1135

Version 1.7b (Brecis)
1. add Antenna Selection function
2. the Atheros wireless driver version is 1.6
3. the stack version is 1135

Version 1.7a (Brecis)
1. add SNMP
2. add SSID Broadcast
3. add Antenna transmit power
4. the Atheros wireless driver version is 1.6
5. the stack version is 1135

Version 1.5c (NEC)
1. add SNMP
2. add SSID Broadcast
3. add Antenna transmit power
4. the Atheros wireless driver version is 1.6
5. the stack version is 1135

Version 1.5b (NEC)
1. fixed when running in the Bridge mode for a while, the AP will be crash.
2. the Atheros wireless driver version is 1.6
3. the stack version is 1135

Version 1.5a(NEC)
1. fixed the Bridge mode file transfer problem
2. fixed the problem on receiving too many BC frame, Bridge will halted
3. the Atheros wireless driver version is 1.6
4. the stack version is 1125

Version 1.7(Brcs)
1. fixed the length of wep key on the wizard setting
2. fixed the send packet of lan is always 0
3. the Atheros wireless driver version is 1.5
4. the stack version is 1125

Version 1.6(Brcs)
1. fixed Bug No. 733, the help link on the Filters page was incorrect.
2. fixed Bug No. 734, on the Help page, missed a link for Filters.
3. fixed Bug No. 735, on the Help - Advanced page, the default value for Authentication
was set to "Auto" not "Open System".
4. fixed Bug No. 736, AP rebooted automatically sometimes
5. the Atheros wireless driver version is 1.5
6. the stack version is 1120

Version 1.5(NEC)
1. fixed Bug No. 733, the help link on the Filters page was incorrect.
2. fixed Bug No. 734, on the Help page, missed a link for Filters.
3. fixed Bug No. 735, on the Help - Advanced page, the default value for Authentication
was set to "Auto" not "Open System".
4. fixed Bug No. 736, AP rebooted automatically sometimes
5. the Atheros wireless driver version is 1.5
6. the stack version is 1120

Version 1.4 (NEC)
1. modified model to brcs
2. the driver version is 1.4
3. the stack version is 1120

Version 1.3 (NEC)
1. add wireless client log function
2. add wireless filter function
3. fixed send packets always showed 0
4. fixed when AP was in bridge mode, it was unable to transfer files.
5. the Atheros wireless driver version is 1.4
6. the stack version is 1120

Version 1.2 (NEC)
1. remove 256bits from Help file
2. the Atheros wireless driver version is 1.1
3. the stack version is 1113

Version 1.1 (NEC)
1. fixed the wireless domain from fix to auto.
2. add 802.1x function
3. add dhcp function
3. the Atheros wireless driver version is 1.1.
4. the stack version is 1109.

Version 1.0 (NEC)
1. fixed Bug No. 658, the WEP Mode could not be saved on the Setup Wizard
2. fixed Bug No. 659, on the Wireless Performance page, the help link was incorrect.
3. fixed Bug No. 660, on the Help page, missed a link "Mode" under Advanced.
4. update help pages.
5. on the Wireless page, check the Authentication was in the Shared Key or not when disabled
WEP.
6. fixed when the WEP mode was in ASCII mode, only can input 0~9, A~F.
7. the Atheros wireless driver version is 1.0.
8. the stack version is 1100.

Version 1.0b (NEC)
1. add a g only mode
2. fixed AP client bug
3. fixed Bug No. 636, changed the default ip t0 192.168.0.50
4. the Atheros wireless driver version is 2.30.62
5. the stack version is 1094

Version 1.00 (NEC)
1. the default ip address is 192.168.0.30
2. the Atheros wireless driver version is 2.30.62
3. the stack version is 1084

v2.05b4

dwl-2000 205b4 brcs nml.bin (896 KB)

Download.