D-Link Support Resources

DSL-G604T Release Notes - Rev B

V2.00B12.AU_20070509

* LAN Client IP restriction to DHCP pool removed
* Java applet LAN flooding resulting in lockup fixed
* Port redirection with changing WAN-LAN ports fixed

v2.00B07.AU_20060901

* Fixed Status page Gateway IP address not shown
* Fixed PPPD doesn't send PADT when doing "Save and Reboot"
* Multiple port redirection fixed

v2.00B06.AU_20060728

* Fix for Mepis6.0 OS and DNS from DHCP.
* Fix for IPv6 requests sent to unit.

V2.00B05.AU_20060711

* Fixed P2P lockups.
* Fix WAN page not displaying correct settings.
* Fix DMZ feature being disabled after using Port Forwarding/Virtual Server .

V2.00B04.AU_20060601

* Fixed Virtual Server does not work after DMZ has been disabled.
* Fixed Log does not include timestamp.
* Fixed Wireless connectivity issue with DSM-320/DSM-320RD.
* Increased amount of NAT sessions that can be handled.
* Fixed Keep Alive for connection to certain ISPs.

v2.00B02.AU_20050914

* Fixes PlayStation 2 DNAS Authentication Issues.
* Enables UPnP by Default.
* Backup, Load Config Feature added.
* Add Wireless Management features - ACL, Assosiated Stations, Multiple SSID

How To Load Firmware (ver.2.0 or above) with ADSL2/2+ Support

ADSL2/2+ firmware is backward compatible with non-ADSL2/2+ connections.
If your modem/router is running firmware ver. 2.0 or above it already
has ADSL2/2+ support.

NOTE: Firmware upgrade requires certain steps. Please read
this document prior to proceeding with the upgrade.

Disclaimer:
- D-Link Australia does not guarantee that this firmware
is fully compatible with all Internet Providers' ADSL2/2+ DSLAMs.
- Please confirm with your Internet Provider the availability
of ADSL2/2+ services in your area.
- Upgrading the modem/router to the ADSL2/2+ firmware is not
reversible to firmware versions prior to 2.0 without returning the
product to D-Link Australia RMA Dept. ADSL2/2+ firmware is however
backward compatible with ADSL(1).

UPGRADE STEPS:
- You may have two options (see A or B) with the new firmware:
(A) *PREFERRED OPTION* Firmware upgrade utility (EXE) file.
Follow the steps listed below;
(B) WEB Interface binary (WEB) file.
This file can not be used if your router is running firmware older
than ver. 2.0. If it has ver. 2.0 or above, the upgrade can be
carried out through router's WEB interface via Tools > Firmware;

(A) This option is not suitable for Windows Vista.
- Download the EXE firmware file and save it into any folder on
your computer.
- FACTORY RESET the modem/router before upgrading.
- Connect the modem/router directly to your computer via network cable
(do not use wireless connection).
- Disable Firewall/Antivirus software on your computer.
- !!!IMPORTANT!!! You must assign a static IP address to your PC
before upgrading the firwmare, otherwise it will corrupt your unit.
Steps: Go to Control Panel > Network Connections > Local Area Connection >
Properties > Internet Protocol TCP/IP > Properties >
IP address: 10.1.1.5,
Subnet Mask 255.0.0.0,
Default Gateway 10.1.1.1.
- Run the firmware upgrade utility.
When prompted, enter the unit's IP address (10.1.1.1)
and username/password (admin/admin).
- Do not turn the unit off while loading firmware.
- After the firmware is loaded check the version under Tools > Firmware.
You can now change your computer back to 'Obtain IP Address Automatically'.
- Reconfigure the router according to your ISP's requirements.
- Save the settings under Tools > [System] > Save & Reboot.

(B)
- Download the WEB firmware file and save it into any folder on
your computer.
- FACTORY RESET the modem/router before upgrading.
- Connect the modem/router directly to your computer via network cable
(do not use wireless connection).
- Disable Firewall/Antivirus software on your computer.
- Log into your modem/router via http://10.1.1.1.
- Click on Tools > Firmware > Browse... Select the downloaded firmware file
and click Open and then Apply.
- Wait until the router completes the firmware update and reboots.
- Reconfigure the modem/router according to your ISP's requirements.
- Save the settings under Tools > [System] > Save & Reboot.

NOTE: This firmware is only suitable for modems/routers distributed in
Australia. If you bought your router outside Australia or New Zealand
the firmware upgrade may damage your router and void the Warranty.

READ ME - How to Recover Router

How to Recover Router.zip (181.98 KB)

Download.

Firmware V2.00B12.AU 20070509 WEB

DLinkAU DSL-G604T singleimage kernel fs V2.00B12.AU 20070509 (2.43 MB)

Download.

Firmware V2.00B12.AU 20070509 EXE

DSL-G604T V2.00B12.AU 20070509.exe (3.24 MB)

Download.

REV A

Software

DSL-xxxT GPL SourceCode v2.00 20051230.tgz (42.99 MB)

Download.

SNMP

No SNMP Available.pdf (22.99 KB)

Download.

SetupGuides

How to Secure Wireless.pdf (173.42 KB)

Download.

How to Open Ports in DSL-xxxT firmware 1.x.pdf (165.9 KB)

Download.

How to Open Ports in DSL-xxxT.pdf (346.07 KB)

Download.

Advanced Filters Setup in DSL-G604T.pdf (1.52 MB)

Download.

How To Recover Router With Corrupted Firmware

How to Recover Router.zip (181.78 KB)

Download.

ScreenCaptures

DSL-G604T Screenies FW-v2.00B01T01.AU.pdf (3.35 MB)

Download.

DSL-G604T Screenies FW-v1.00B06.AU.pdf (1.95 MB)

Download.

DSL-G604T Screenies FW-v1.00B03.AU.pdf (2.56 MB)

Download.

QuickInstallGuide

DSL-G604T QIG v1.00.pdf (758.02 KB)

Download.

Manuals

ADSL2+ v1.00

DSL-G604T ADSL2+ Manual v1.00.pdf (3.06 MB)

Download.

Firmware

DSL-G604T Release Notes - Rev A

V2.00B12.AU_20070509

* LAN Client IP restriction to DHCP pool removed
* Java applet LAN flooding resulting in lockup fixed
* Port redirection with changing WAN-LAN ports fixed

v2.00B07.AU_20060901

* Fixed Status page Gateway IP address not shown
* Fixed PPPD doesn't send PADT when doing"Save and Reboot"
* Multiple port redirection fixed

v2.00B06.AU_20060728

* Fix for Mepis6.0 OS and DNS from DHCP.
* Fix for IPv6 requests sent to unit.

V2.00B05.AU_20060711

* Fixed P2P lockups.
* Fix WAN page not displaying correct settings.
* Fix DMZ feature being disabled after using Port Forwarding/Virtual Server .

V2.00B04.AU_20060601

* Fixed Virtual Server does not work after DMZ has been disabled.
* Fixed Log does not include timestamp.
* Fixed Wireless connectivity issue with DSM-320/DSM-320RD.
* Increased amount of NAT sessions that can be handled.
* Fixed Keep Alive for connection to certain ISPs.

v2.00B02.AU_20050914

* Fixes PlayStation 2 DNAS Authentication Issues.
* Enables UPnP by Default.
* Backup, Load Config Feature added.
* Add Wireless Management features - ACL, Assosiated Stations, Multiple SSID

Available with EXE upgrade as well as WEB upgrade.

===================================================================
v2.00B02.AU_20050905

* Fixes PlayStation 2 DNAS Authentication Issues.
* Enables UPnP by Default.
* Backup, Load Config Feature added.
* Add Wireless Management features - ACL, Assosiated Stations, Multiple SSID

===================================================================
v2.00B01T01.AU

=] NOTE [=
- It is advised to FACTORY RESET the unit before upgrading.
- You must assign a static IP address to your PC (same subnet) before upgrading the firwmare otherwise it will corrupt your unit. eg: IP: 10.1.1.5, Subnet 255.0.0.0
- You cannot downgrade to previous firmwares once you have upgraded to v2.00B01T01.AU

* ADSL 2/2+ Support (only available with selected ISPs)
* Add Dynamic DNS Support - www.dyndys.org, www.no-ip.com
* Add SNMP Support - v1, v2c
* New Port Forwarding Feature with Predefined Items
* Add LAN Clients page for Port Forwarding Feature
* Add Static DHCP Feature
* Add Bridge Filters Feature
* Add IGMP Feature
* Add Remote Log Feature

===================================================================
v1.00B06.AU

* Allow the use of the character "&" in the PPP password field.

===================================================================
v1.00B05.AU

* Add UPnP page.
* Enable UPnP by deafult.
* Fix DNS Pass Through failed when DNS relay is disabled. (Fix it by using Primary DNS of Home->DNS setting if DNS Relay is disabled)
* Fix the source IP of the packet to be changed to local IP after port forwarding.
* Corrected MAC Address Filtering and added Access List.
* Add Wireless Clients option under Status tab.
* Move Save & Reboot options to their own page.

===================================================================
v1.00B04T01.AU

* Improved connectivity (Line Sync) with Ericsson and NEC DSLAMs.

===================================================================
v1.00B04.AU

* Improved 802.11b and Intel Centrino compatibility
* DHCP assigned DNS will now show correct IP if LAN address is changed.
* Add Connect button to Home > WAN page
* Bug Fix for WEP when using ASCII

===================================================================
v1.00B03.AU

Initial Release

READ ME - How to Recover Router

How to Recover Router.zip (181.98 KB)

Download.

Firmware V2.00B12.AU 20070509 WEB

DLinkAU DSL-G604T singleimage kernel fs V2.00B12.AU 20070509 (2.43 MB)

Download.

Firmware V2.00B12.AU 20070509 EXE

DSL-G604T V2.00B12.AU 20070509.zip (3.04 MB)

Download.