D-Link Australia & New Zealand Support Resources
Home
Technical Support
Check Warranty Status
Warranty/RMA procedure
Check RMA Status
Contact Us
Download
DSL-502T_NZ
REV A
Download direct:
http://files.dlink.com.au/products/DSL-502T_NZ/REV_A/Manuals
Manuals
v3.00
DSL-502T Manual v3.00.pdf (2.32 MB)
Download.
Other Documents
Software
No Software Available.pdf (22.85 KB)
Download.
SNMP
No SNMP Available.pdf (22.99 KB)
Download.
SetupGuides
How to Recover DSL-502T.pdf (400.89 KB)
Download.
How to Open Ports in DSL-xxxT FW v2.x.pdf (289.07 KB)
Download.
How to Open Ports in DSL-xxxT FW v1.x.pdf (165.9 KB)
Download.
How To Open Ports in DSL-502T - v2.00B02 or Above.pdf (289.12 KB)
Download.
How To Open Ports in DSL-502T - v1.00B04 or Above.pdf (165.96 KB)
Download.
ScreenCaptures
DSL-502T Screenies - v2.00B02.AU.pdf (2.65 MB)
Download.
DSL-502T Screenies - v1.00B05.AU.pdf (2.02 MB)
Download.
QuickInstallGuide
DSL-502T QIG v1.00.pdf (1.03 MB)
Download.
Firmware
V3.00B02.NZ_20060710* Fixed P2P lockups * Increased DSLAM support * Changed default Wizard time zone to �(GMT+12:00) Wellington, Auckland� v1.00B01.NZ* Initial Release
How To Load Firmware (ver.2.0 or above) with ADSL2/2+ SupportADSL2/2+ firmware is backward compatible with non-ADSL2/2+ connections. If your modem/router is running firmware ver. 2.0 or above it already has ADSL2/2+ support.NOTE: Firmware upgrade requires certain steps. Please read this document prior to proceeding with the upgrade.Disclaimer: - D-Link Australia does not guarantee that this firmware is fully compatible with all Internet Providers' ADSL2/2+ DSLAMs.- Please confirm with your Internet Provider the availability of ADSL2/2+ services in your area.- Upgrading the modem/router to the ADSL2/2+ firmware is not reversible to firmware versions prior to 2.0 without returning the product to D-Link Australia RMA Dept. ADSL2/2+ firmware is however backward compatible with ADSL(1).UPGRADE STEPS:- You may have two options (see A or B) with the new firmware: (A) *PREFERRED OPTION* Firmware upgrade utility (EXE) file. Follow the steps listed below; (B) WEB Interface binary (WEB) file. This file can not be used if your router is running firmware older than ver. 2.0. If it has ver. 2.0 or above, the upgrade can be carried out through router's WEB interface via Tools > Firmware;(A) This option is not suitable for Windows Vista.- Download the EXE firmware file and save it into any folder on your computer.- FACTORY RESET the modem/router before upgrading.- Connect the modem/router directly to your computer via network cable (do not use wireless connection).- Disable Firewall/Antivirus software on your computer.- !!!IMPORTANT!!! You must assign a static IP address to your PC before upgrading the firwmare, otherwise it will corrupt your unit. Steps: Go to Control Panel > Network Connections > Local Area Connection > Properties > Internet Protocol TCP/IP > Properties > IP address: 10.1.1.5, Subnet Mask 255.0.0.0, Default Gateway 10.1.1.1.- Run the firmware upgrade utility. When prompted, enter the unit's IP address (10.1.1.1) and username/password (admin/admin).- Do not turn the unit off while loading firmware.- After the firmware is loaded check the version under Tools > Firmware. You can now change your computer back to 'Obtain IP Address Automatically'. - Reconfigure the router according to your ISP's requirements. - Save the settings under Tools > [System] > Save & Reboot.(B) - Download the WEB firmware file and save it into any folder on your computer. - FACTORY RESET the modem/router before upgrading.- Connect the modem/router directly to your computer via network cable (do not use wireless connection).- Disable Firewall/Antivirus software on your computer.- Log into your modem/router via http://10.1.1.1. - Click on Tools > Firmware > Browse... Select the downloaded firmware file and click Open and then Apply.- Wait until the router completes the firmware update and reboots.- Reconfigure the modem/router according to your ISP's requirements. - Save the settings under Tools > [System] > Save & Reboot.NOTE: This firmware is only suitable for modems/routers distributed inAustralia. If you bought your router outside Australia or New Zealand the firmware upgrade may damage your router and void the Warranty.
READ ME - How to Recover Router
How to Recover Router.zip (181.98 KB)
Download.
Firmware 3.00B02.NZ.20060710 EXE
DSL-502T V3.00B02.NZ.20060710.exe (2.9 MB)
Download.
Drivers
v1.00
DSL-502T USB Driver Setup.exe (1.65 MB)
Download.