D-Link Support Resources

DI-804/808HV Firmware Release Note

Firmware: v1.42(Beta v1.41b08)
Hardware: All
Date: June 30, 2005

Problems Resolved:
1. Router�s WAN IP can respond �Ping� packet that is sent out by UI�s Ping tool.
2. The feature of NAT-Traversal would be enabled only if both VPN endpoints support it.
3. The VPN client that is behind a NAT router (supports IPSec pass-throughput) can establish IPSec tunnel with DI-804HV without setting any local ID or remote ID.
4. Add a XBOX Enable/Disable option.
5. Fix the following problems:
(1) Users can�t enable/disable URL blocking if there are 10 rules in the list.

======================================
Firmware: v1.41b08
Hardware: All
Date: June 30, 2005

Problems Resolved:
1. Router�s WAN IP can respond �Ping� packet that is sent out by UI�s Ping tool.
2. The feature of NAT-Traversal would be enabled only if both VPN endpoints support it.
3. The VPN client that is behind a NAT router (supports IPSec pass-throughput) can establish IPSec tunnel with DI-804HV without setting any local ID or remote ID.
4. Add a XBOX Enable/Disable option.
5. Fix the following problems:
(1) Users can�t enable/disable URL blocking if there are 10 rules in the list.

*** 1.41b06 TO 1.41b07 ***

1. Fix the following problems:
(1) If there is an �Allow� firewall rule which permits LAN clients to access WAN websites, and
enables SPI mode simultaneously. Then LAN clients can�t open any web pages.
(2) Router can�t reassemble fragment packets that are fragmented by PPTP server.

*** 1.41b05 TO 1.41b06 ***

1. Fix the following problems:
(1) Users can�t finish configurations of Manual Key VPN, because the Apply button doesn�t work.

*** 1.41b04 TO 1.41b05 ***

1. Fix the following problems:
(3) Router will display an error page when users input their old password into all the fields of Old Password, New Password, and Reconfirm at Setup Wizard.
(4) Fails to establish IPSec tunnel with D-Link DFL-100.

*** 1.41b03 TO 1.41b04 ***

1. Router will jump a login window whenever administrator changes the password successfully in the wizard.
2. Add an �Active sessions� to display detailed information of active sessions of router.
3. Add local and remote ID options at VPN configuration page.
4. Fix the following problems:
(1) With Dial-up WAN connection, LAN host can�t trigger router to dial to Internet when its DNS server is LAN IP of router.
(2) Router will reboot when it starts to establish IPSec tunnel with Aggressive mode and NAT traversal.

*** 1.41b02 TO 1.41b03 ***

1. Support GPRS modem.
2. Support RTP traffic pass-through.
3. Fix the following problems:
(1) If users choose Group2 or Group5 as the DH-Group of IKE proposal, two DI-804HVs can�t establish IPSec tunnel successfully by using aggressive mode.

*** 1.41b01 TO 1.41b02 ***

1. Support cell phone modem in Russia.
2. Fix the following problems:
(1) The list of Static DHCP will be incorrect when users add 15th record.

*** 1.41 TO 1.41b01 ***

1. Add an additional field of authentication method (including Auto, PAP, CHAP, MS_CHAPv1; Default is Auto) at the Dial-up WAN configuration page.
2. A user can only open TCP port 1720 for his PC at Virtual Server, instead of indicating the PC as a DMZ host, when he wants to use Microsoft NetMeeting.

*** 1.40b11 TO 1.41 ***

1. Fix the following problems:
(1) G804v, which doesn�t support Address/Field Compression, can't connect to PPTP server on DI-804/808HV.
(2) MSN messenger doesn�t work if users open port 1723 at Virtual Server.
(3) PPTP client can�t request the same fix IP whenever it connects to PPTP server on DI-804/808HV.
(4) Peanut-Hull can�t be activated at DDNS configuration page.

*** 1.40b10 TO 1.40b11 ***

1. Fix the following problems:
(1) Static PPTP and static L2TP doesn't work with v1.40b10.

*** 1.40b08 TO 1.40b10 ***

1. Fix the following problems:
(1) The display time of logs will be incorrect if users using Mozilla or Netscape borwsers.
(2) Sometimes send/receive mail within VPN tunnel would be failed.
(3) Using "user" to local login can't go back correctly when clicking "Continue" button if remote management is activated.
(4) Router will drop WAN connection automatically when idle time is expired, even if there is still data transferring within the VPN tunnel.
(5) The gateway IP of router is not allowed to end with 255, such as x.x.x.255.

*** 1.40b07 TO 1.40b08 ***

1.Fix the following problems:
(1) Dynamic VPN can't be reconnected again if remote clients reboot.
(2) LAN PCs can't access remote FTP server if router is in SPI mode.
(3) Router can't drop PPPoE connection even though the idle time has expired.

*** 1.40b06 TO 1.40b07 ***

1.Fix the following problems:
(1) Dynamic VPN can't work on v1.40b06.
(2) Dynamic VPN can't be reconnected again if remote clients reboot.

*** 1.40b05 TO 1.40b06 ***

1.Auto-detect i2eye device, and open/close port 1720 automatically.
2.Router will jump a window to remind users if they don't finish configurations of DDNS.
3.Remove Multi Global IP feature.
4.Change Peanut-Hull server to HPH002.oray.net.
5.Fix the following problems:
(1) The router updates to Peanut-Hull too frequently if users set wrong user name or password.
(2) Using "user" to remote login can't go back correctly when clicking "Continue" button.

*** 1.40b04 TO 1.40b05 ***

1.Static IP WAN type can dial backup connection automatically if connection
between ISP and ATU-R has been broken.
2.Fix the following problem on 1.40b04:
(1) VPN tunnel would be broken after some time.
(2) Users can not connect to router after some time.

*** 1.40b03 TO 1.40b04 ***

1.Support IPSec NAT-Traversal.

*** 1.40b02 TO 1.40b03 ***

1.Support Syslog server located on WAN.
2.Fix the following problem:
(1) There are a lot of incorrect VPN rules in VPN Status window.

*** 1.40b01 TO 1.40b02 ***

1.Fix failed items of CDRouter test.
2.Change firewall destination IP from * to real destination IP if the rule is derived from Virtual Server.
3.Support NO-IP DDNS service.
4.Fix the following problem:
(1) Netmeeting (on Microsoft Windows 2000) is unable to connected success through VPN tunnel.
(2) Can't establish Manual IPSec tunnel with early firmware version.

*** 1.40(Aug 12) TO 1.40b01 ***

1.Support xAuth (Client and Server mode) authentication with IPSec connection.
2.Support i2eye ALG.
3.Prevent different devices from using the same XID to send DHCP request.
4.Fix the following problem:
(1) Virtual Server doesn't work if public port and private port are not the same.
(2) Router(with WAN type: Dial-up connection) will auto-reboot if LAN PC reboots.

*** 1.40(Aug 9) TO 1.40(Aug 12) ***

1.Fix NetMeeting problem of v1.40(Aug 9).
2.Change the source interface of firewall rule "Allow to Ping WAN port" from LAN to WAN.
(The change will take effect after resetting router setting to factory default.)
3.Change the value of Max. number of tunnels from 0 to 1.
4.Add the descriptions of L2TP and PPTP server into help field.

*** 1.38b03 TO 1.40 ***

1.Rename from 1.38b03 to 1.40.

*** 1.38b02 TO 1.38b03 ***

1.Fix the problem about PPTP/L2TP server with MPPE can only accept one connection from remote client.
2.Fix the problem of MAC filter if user setup more than 16 rules.
3.Fix the problem about Dial-up would be hanged after 3 times retry when users ping remote VPN subnet simultaneously.
4.Fix keep alive problem of BigPond WAN connection.
5.Fix the problem about WAN PCs can ping to LAN IP of router when PPTP/L2TP server is enabled.
6.Fix the problem of IP filter if users input a IP group 192.168.0.90-192.168.0.100.
7.Fix the problem of firewall if users input a IP group 192.168.0.90-192.168.0.100.
8.Support different PPTP/L2TP clients that are behind a NAT device can establish PPTP/L2TP connection with DI-804/808HV.
9.Improve the throughput of IPSec connection.
10.Change the descriptions of "others" and "PPTP" WAN type.

*** 1.39 TO 1.38b02 ***

1.Rename from v1.39.

*** 1.38 TO 1.39 ***

1.Add IPSec VPN Keep-alive mechanism.
2.Add D-Link web cameras(DCS-900, 1000, 2000, 3120, 5300) into
default lists of Virtual Server.
3.Change the default connect mode to Connect-on-demand, and set the
idle time to 5 minutes.
4.Add MPPE encryption with PPTP and L2TP server.
(Note. MPPE can only works with MS_CHAP authentication.)
5.Support PPTP WAN type can connect to PPTP server of Microsoft Windows 2000/2003.
6.Change firewall mechanisms.
7.Support PPTP client on Windows 98 can connect to PPTP server on DI-804/808HV.
(It's recommended to reset configuration to factory default after upgrading to this firmware.)

*** 1.37b01 TO 1.38 ***

1.Rename from v1.37b01.

*** 1.37 TO 1.37b01 ***

1.Fix the problem about users can't transfer files within IPSec VPN tunnel.
2.Fix the problem about L2TP WAN connection doesn't work in Israel.
3.Change the default connect mode to Connect-on-demand, and set the idle time to 5 minutes.
(Users need to reset router setting to factory default first.)

*** 1.36b01 TO 1.37 ***

1.Rename from v1.36b01.

*** 1.36 TO 1.36b01 ***

1.Fix UI error when swith VPN configuration pages.
2.Fix the problem about mail alert function can't transfer mail with some SMTP servers.
3.Replace the real key value with asterisks in VPN configuration pages.
4.Support SMTP authentication with mail alert function.

*** 1.35b02 TO 1.36 ***

1.Rename from v1.35b02.

*** 1.35b01 TO 1.35b02 ***

1.Fix the problem about users can't drop certain VPN connection.

*** 1.35 TO 1.35b01 ***

1.Add IPsec Filter.
2.Add MTU option on PPTP and L2TP.
3.Support domain name resolving with LNS when dynamic L2TP is choosed.
4.Change auto-reconnect mechanism and add a "Connect mode select" option.
5.Add a check mechanism to prevent LAN, PPTP server, and L2TP server from using the same network.
6.Support EON flash.

*** 1.34b04 TO 1.35 ***

1.Rename from 1.34b04.

*** 1.34b03 TO 1.34b04(2004/01/29) ***

1. Fix Static DHCP Client List Bug (up to 15 items).

*** 1.34b02 TO 1.34b03(2004/01/07) ***

1.Fix DDNS function may cause DynDNS.org abuse.
A.Stop continuing to update if authentication failed.
B.Add model name and firmware version into agent information.
2.Fix the link problem after changing configuration by remote host.
3.Fix the VPN connection problem when using dial-up WAN type.
4. Support SSL(HTTPs) web connection.
5. Add L2TP WAN connection.
6. Add PeanutHull in DDNS support list.

*** 1.34b01 TO 1.34b02(2003/11/21) ***

1.Add VPN status window and VPN disconnect button.
2.Fix the problem of more proposals within one rule can't work.
3.Shorten the time period when PPTP client finish connecting to it.

*** 1.34 TO 1.34b01(2003/10/31) ***

1.Add Daylight function.

*** 1.33b03 TO 1.34 ***

1.VPN Gateway support DNS.

*** 1.33b03 TO 1.33b04(Only Test,2003/11/13) ***

1. support HTTPS.

*** 1.33b02 TO 1.33b03(2003/10/13) ***

1. Fix Dyanmic Routing.

*** 1.33b01 TO 1.33b02 (Only Test) ***

1.Test FW.

*** 1.30 TO 1.33b01 (20030702) ***

1.Add L2TP and PPTP.

*** 1.20 TO 1.30 (20030619) ***

1.Change Dyamic VPN setting seat.

*** 1.20 TO 1.30 (20030609) ***

1. Add Dynamic VPN setting .
2. Add Dynamic VPN setting to Help.
3. NetBIOS broadcast function can't broadcast mutuall via Dunamic VPN tunnel.
4. Add check mechanism about Remote Gate of VPN can't accept 0.0.0.0.
5. Netmeeting can't see the image on one side.

*** 1.20 TO 1.30 (20030515) ***

1. Auto backup link support.
2. Internet Access Monitor.
3. SPI & DoS firewall.
4. SDI sservice using Ericsson's HIS.
5. Dynamic route: RIP1,RIP2.6. Dynamic VPN.(add descriptions in VPN help)

*** 1.14aHV TO 1.20 ***

1.Solved PPPoE can't connect!

*** 1.13 TO 1.14aHV ***

1. Add NetBIOS broadcast in VPN settings.
2. Add RIP 2.

*** 1.12 TO 1.13 ***

1. Add VPN Aggressive Mode.

*** 1.12

First release..

v1.41b08

v1.41b08.zip (663.17 KB)

Download.

v1.41b03

v1.41b03.zip (657.75 KB)

Download.

v1.40b11

v1.40b11.zip (1.68 MB)

Download.

v1.40 040812

v1.40 040812.zip (1.66 MB)

Download.