D-Link Support Resources

DCS-5020L Firmware Release Notes
=================================

**Note: a factory reset is recommended after upgrading to ensure correct configuration is applied**

Hardware: Rev. A1
Firmware: V1.14.09
Date: 12/12/2016

Upgrading Instructions
Follow the steps below to upgrade the firmware:
1. Download the latest firmware file from the D-Link website. The file is in .bin file format.
2. Login to the camera web UI and enter setup/Maintenance/Firmware upgrade
3. Click Browse� and specify the firmware file.
3. Click Upgrade. The camera starts to upgrade and will reboot automatically when the upgrade completes.

New Features
1. Upgrade mydlink agent
2. Changed the HTTPS self-signed certificate to SHA2 algorithms
3. Support mydlink UID mechanism
4. Changed the support page hyperlink
5. Update OpenSSL
6. Update mDNSResponder
7. Change the default systm time to 2016-01-01
8. Add authentication to CGI/config/stream_info.cgi
9. Offer password validation on console port

Problems Resolved

1. Fixed an issue where /config/ptz_move.cgi didnt move the camera view in the correct direction when the camera is installed upside down and flip/mirror are both enabled
2. Fixed and removed some vulnerabilites

DCS-5020L FW v1.13

dcs5020l v1.13.05.bin (8 MB)

Download.

DCS-5020L FW v1.11

dcs5020l v1.11.08.bin (8 MB)

Download.

DCS-5020L Firmware Release Notes
=================================

**Note: a factory reset is recommended after upgrading to ensure correct configuration is applied**

Hardware: Rev. A1
Firmware: V1.11.08
Date: 1/10/2015

Upgrading Instructions
Follow the steps below to upgrade the firmware:
1. Download the latest firmware file from the D-Link website. The file is in .bin file format.
2. Login to the camera web UI and enter setup/Maintenance/Firmware upgrade
3. Click Browse� and specify the firmware file.
3. Click Upgrade. The camera starts to upgrade and will reboot automatically when the upgrade completes.

New Features
1. mydlink agent - upgrade mydlink agent to 2.0.19-b52
2. Reduction of background noise
3. Add the login check machanism to solve Brute Force Attack issue

Problems Resolved

1. Fixed the IE11 compatibility issue in Windows 10.
2. Change WPS LED behavior blinking time on WPS error/timeout to 10 seconds.
3. Removed the reboot function by pressing and holding the reset button in for less than 3 seconds.
4. Added the pop-up warning message when a user creates an existing user account on Device Web GUI.
5. Support to auto-create FTP folder if the folder doesn�t exist on FTP server.