D-Link Support Resources

DSL-2880AL Firmware Release Notes
=================================

H/W: A1
F/W: AU_v2.01
Date: 11/09/2014

Bug Fixes:

1. Removed duplicate Daemon warnings in the Syslog Server output
2. UPnP now works in Residential Gateway Mode (NBN/UFB)
3. Fixed the SSID reported in the Web UI under Wi-Fi Clients being repeated for each new client that connects
4. Fixed FTP port issue that would block access regardless of port used

Known Issues:

1. DLNA Media Server is limited to 100 files currently
2. When configuring Port Forwarding or Virtual Server an Inbound Filter rule needs to be created for all TCP/UDP port to
3. NTP cannot update time by IPv6 address or IPv6 domain server
4. Port Forwarding port 80 to a web server might require a power cycle of the router after clicking Apply

DSL-2880AL A1 AU 2.01 09112014.bin (10.33 MB)

Download.

Firmware AU 2.00 06052014

DSL-2880AL A1 AU 2.00 06052014.bin (10.23 MB)

Download.

Firmware AU 1.01b 03132014

DSL-2880AL Firmware Release Notes
=================================

** After upgrading the firmware it is highly recommended that your perform a Factory Reset of the DSL-2880AL **
** This will ensure that the correct configuration is loaded from the new firmware **

H/W: A1
F/W: AU_v1.01b
Date: 13/03/2014

New Features:

1. mydlink Lite and mydlink + apps now supported

Bug Fixes:

1. Add enable/disable radio button to inbound filter controller
2. Web File server cannot work with default port 8000 or no default port
3. FTP server still works with default port 21 even after set to port 2121, and client cannot access ftp server if WAN is up
4. SAMBA / Windows File sharing via USB port speed improvements
5. Local System Log is functional again
6. Corrected default name displayed in mydlink portal and apps
7. Corrected some typos in the Setup Wizard
8. If you cancel the Setup Wizard and then setup manually the mydlink feature would not register
9. Corrected some typos on the DHCP Server page
10. Corrected some wording and explanations on the Storage/SAMBA page
11. Inbound Filter rule fix for DMZ and Port Forwarding features
12. NAT Loopback fixes

Known Issues:

1. DHCP Reservation cannot assign an IP to a device that is inside the DHCP Pool
2. DLNA Media Server is missing from this release will be in next release
3. When configuring Port Forwarding or Virtual Server an Inbound Filter rule needs to be created for all TCP/UDP port to
4. NTP cannot update time by IPv6 address or IPv6 domain server
5. P2P/BT connection issues, poor data rate
6. MTU for NZ is set to 0 if following the Setup Wizard, when it should be 1490
7. USB Storage with GPT (GUID) partitions are not detected
8. DSL LED will flash while in NBN/UFB Mode
9. Port Forwarding port 80 to a web server might require a power cycle of the router after clicking Apply

DSL-2880AL A1 AU 1.01b 03132014.bin (9.06 MB)

Download.

Firmware AU 1.01 01072014

DSL-2880AL Firmware Release Notes
=================================

** After upgading the firmware it is highly recommended that your perform a Factory Reset of the DSL-2880AL **
** This will ensure that the correct configuration is loaded from the new firmware **

H/W: A1
F/W: AU_v1.01
Date: 07/01/2014

New Features:

1. mydlink CLoud Services
2. IGMP Proxy

Bug Fixes:

1. Corrected some incorrect wording in teh Setup Wizard
2. Set default VPI and VCI into the WAN Settings page
3. Fixed SAMBA issue with spaces in folder and file names
4. Fixed Remote Management port when enabling for 8080
5. SSID now supports special characters
6. 5Ghz Wireless Guest SSID fix for WEP and WPA/WPA2 security
7. USB Web Filer Server port issue
8. FTP server port changes now are saved correctly
9. Inbound HTTP issue
10. 5G wireless channel bandwidth not displaying correctly
11. 5G Wireless security is now saved via Setup Wizard
12. Link'n Print improvements
13. WPS button and security
14. Port Mapping interface labels are now correct
15. 5G Wireless Guest SSID could not be enabled unless 2.4G Wireless main network was enabled
16. USB storage with 2 or more partitions can now be accessed
17. Budget Quota fix for MER connections
18. Clone MAC address
19. Internet LED will be turned off if Internet connection has been lost
20. Main Wireless SSID cannot ping LAN Clients
21. USB Web Filter server issues when enabled
22. Added back channel 165 in 5G Wireless
23. Cannot deactivate USB Storage device
24. Port Forwarding Rule with different Internal and External ports now work

Known Issues:

1. DHCP Reservation cannot assign an IP to a device that is inside the DHCP Pool
2. SAMBA / Windows File sharing via USB port is slow or inaccessible for around 5~10 mins after intial power on
3. NBN/UFB mode cannot be setup manually via the WAN Setup page
4. Local System Log is not functional
5. DLNA Media Server is missing from this release
6. mydlink Lite and mydlink + apps do not yet support this device, updates coming soon
7. When configuring Port Fowarding or Virtual Server an Inbound Filter rule needs to be created for all TCP/UDP port to 0.0.0.0
8. NTP cannot update time by IPv6 address or IPv6 domain server
9. P2P/BT connection issues, poor data rate

DSL-2880AL A1 AU 1.01 01072014.bin (9.33 MB)

Download.

Firmware AU 1.00 08202013

DSL-2880AL Firmware Release Notes
=================================

H/W: A1
F/W: AU_v1.00
Date: 20/08/2013

Initial Release

DSL-2880AL AU 1.00 08202013.bin (8.92 MB)

Download.