DSL-2870B Firmware Release Notes================================IMPORTANT: When upgrading from firmware ver.1.0x to 2.0x you will need first to upgrade to firmware ver.2.00.00, here is the link to this firmware:ftp://files.dlink.com.au/products/DSL-2870B/REV_A/Firmware/DSL-2870B_FW_upgrade_from_v1.01.24_to_v2.00.00AU_06062013.zip *NOTE: Updating firmware to version 2.01.01 from an earlier version may clear all previous settings. Please have ready your ISP account login details which need to be re-entered into the router along with any other settings such as wireless details.**NOTE: When upgrading to v2.01.01 you will need to cancel the Wizard after upgrade and perform a factory reset via the Maintenance > System page.H/W: A1F/W: 2.01.01Date: 11/03/2014New Features:1. VDSL Modem support and functions - PTC274/14/0012. Add NAT Loopback function3. Add VDSL Wizard settings with NZ profilesBug Fixes:1. Fix WLAN 5G 40M Hz bandwidth mode setting issue when manually setting channel as 36,40,44,48,149,153,157,161,165.2. Add mydlink send email function (currently doesnt support new firmware notification)3. Enhance mydlink MAC & ACL filter functions4. Fix USB HUB will cause code trace and kernel panic issues5. USB Storage feature - Failing to detect 2TB and 4TB HDD6. Residential Gateway Mode with PPPoE Setting - DNS issue 0.0.0.07. IPv6 - bug showing not connected when it is connected8. Fix Budget quota doesn't work with Ethernet (NBN/UFB) WAN Interface9. Default Profiles for New Zealand ISPs are missing MTU value corrected to MTU 1490-------------------------------------------------------------------------*NOTE: Updating firmware to version 2.00.01 from an earlier version may clear all previous settings. Please have ready your ISP account login details which need to be re-entered into the router along with any other settings such as wireless details.**NOTE: When upgrading to v2.00.01 you will need to cancel the Wizard after upgrade and perform a factory reset via the Maintenance > System page.H/W: A1F/W: 2.00.01Date: 27/06/2013CD Setup Ver.: DCC_v1.00_(20121023)Bug Fixes:1. Fix Wireless LAN 5Ghz (40Mhz) bandwidth mode setting issue when manually setting channel as 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 1652. Fix Wireless LAN 2.4 Ghz Access Control-------------------------------------------------------------------------*NOTE: Updating firmware to version 2.00.00 from an earlier version will clear all previous settings. Please have ready your ISP account login details which need to be re-entered into the router along with any other settings such as wireless settings.**NOTE: When upgrading to v2.00.00 you will need to cancel the Wizard after upgrade and perform a factory reset via the Maintenance > System page.H/W: A1F/W: 2.00.00Date: 06/06/2013CD Setup Ver.: DCC_v1.00_(20121023)New Features:1. mydlink Cloud Services2. NBN/UFB Support - configure one of the LAN ports as a WAN port3. New app support - mydlink Lite, One-Touch* and SmartPlay*4. Add VLAN support to WAN interface options5. Setup Wizard runs on first boot of the device until WAN is configured6. Change default SSIDs: 2.4G as 'dlink-2870B-z', 5G as 'dlink-2870B5G-z'7. Add Firmware Checker and Update options to One-Touch app8. Changed DSL LED behaviour to be more informative of connection9. Changed default hostname to "Dualband Wireless N750 Modem Router"10. Support firmware upgrade & config backup/restore with new encryption method11. Support WAN LED activity when using Ethernet WAN mode (NBN/UFB)12. Add 'Interface' option info in DHCP table list13. Change ADVANCED->Applications to ADVANCED->Port Trigger14. Add Network Map page that allows control of advanced functions and shows connected devices15. Improve SharePort functionality16. Upgrade DSL driver for better support and performance17. Add option to enable/disable CAPTCHA graphical login18. Add security to SAMBA account19. Add Storage Status to STATUS section20. Add LAN access control21. New Wireless LAN Schedule options22. DLinkDDNS support23. Add DHCP Relay function24. Complete overhaul of Web UIBug Fixes:1. Fix MAC Filter2. Fix PPP Dial on Demand3. Fix UPnP support4. Fix Daylight Saving time adjustments5. Fix TFTPD leak issue6. Fix DNS leak issue7. Fix can't delete port mapping rules issue8. Fix the SNMP can do setting when using readonly community9. Fix DSL line status issue in STATUS->Statistics page10. Fix 5G Wireless channels visibility11. Fix Setup Wizard issue: Wireless 5G setting doesn't work after wizard12. Fix MSC Multiple Server over one connection function13. Fix 2.4G Wireless weak signal issue14. Fix mydlink enabled devices stopping access to Web UI* Currently only supported via Android, iOS apps coming soon.-------------------------------------------------------------------------H/W: A1F/W: 1.01.24Date: 15/11/2012CD Setup Ver.: DCC_v1.00_(20121023)Bug Fixes:1. DHCP IP Pool: Fix the list to show all DHCP clients2. DHCP Relay: Correct the Source IP3. UPnP: Change default UPnP name to "DSL-2870B"4. RIP: When enabling RIPv1 function router could not send/recieve RIP packet5. DNS: Set Obtain DNS info from a WAN interface as default valueKnown Issues:1. LAN Video quality becomes blocky when using wireless with multicasting2. iOS compatibility is unstable-------------------------------------------------------------------------H/W: A1F/W: 1.01.23Date: 06/11/2012CD Setup Ver.: DCC_v1.00_(20121023)Bug Fixes:1. Updated code for CD Setup Wizard2. DLNA issue: change default media path to "/mnt/usb/" in Web Interface3. DNS settings: Changed to [Obtain DNS info from a WAN interface] by default4. SharePort: Fix SharePort function, SharePort will not work with USB Storage device, you must use SAMBA feature to access this device when connected to the DSL-2870B5. Increase Web Interface Idle Timeout6. Cleaned up POrt Forwarding page7. IP Filter: Source port and Destination port will be filled with port "0" automatically when adding an IP filter rule without inputting any Source port and/or Destination port8. Added xTM button in Status > Statistics page9. Block MAC Address: MAC addresses beginning with 01 will not be accepted as they are reserved for multicasting10. WPS: Added PIN mode in WPS Wizard page11. DHCP Reservation: The IP Address should not be able to be defined as LAN IP address12. WPS: When clicking "reset to unconfigured" the values are now defaulted13. Access Control: some options could not be controlled14. Static IP: Some invalid IPs could be set15. Port Forwarding: When Port Forwarding name is too long, Port Forwarding name was shown empty16. Port Forwarding: Server IP address should only be set in the same network as LAN IP address17. Local network: DHCP Reservation cannot be set as an invalid MAC Address "ff:ff:ff:ff:ff:ff"18. Time and Date: Resolved Time zone error19. Time and Date: Resolved "Copy your computer's time" setting20. DHCP Server: Client device could not obtain correct subnet mask21. Add CAPTCHA to login page22. UPnP: Fix network map and device name in Windows 7 client23. Increase the maximum number of wireless clients that can be connected to the device24. Improve Chrome browser compatibility25. Fix WPS LED control to stop blinking on successful connection26. DHCP Client List will now show all DHCP clients27. SIP: Allow the SIP Server to grab the correct WAN IP address from device28. Static Route: Display static route info in routing table after reboot29. RIP: RIP will now take effect after clicking the apply/save button30. Wireless: When setting the SSID/Network Name visibility to invisible it now hides the SSID/Network Name31. SAMBA: Fix issues with mapping storage device in Windows 7/XP32. DDNS: Fix issue with dlinkddns.com33. IGMP: IPTV had stream lag when disabling IGMP snooping in bridge mode34. Wireless: Added 802.11n Only Mode to dropdown list35. Wireless Channel: Sometimes when selecting a channel number then saving and reboot, the channel would display 6, but should be channel 136. URL Filter: Increase character limit for URL filter to be above 75 characters37. Time and Date: Some time zones can't be automatically synced with Internet time servers38. H.323: Fix issue with NetMeeting not passing packets from WAN to LAN client39. Setup Wizard: Setup Summary Page for Wireless Network now shows both 2.4Ghz and 5Ghz settings40. Local Network: After changing the LAN IP address, the router displays a pop up message window to prompt user to connect on the new IP address41. Advanced Wireless: Modify the warning message when SSID contains "#" and "&" charactersKnown Issues:1. LAN Video quality becomes blocky when using wireless with multicasting2. iOS compatibility is unstable-------------------------------------------------------------------------H/W: A1F/W: 1.01.14Date: 27/07/2012CD Setup Ver.: DCC_v1.00_(20120801)Initial Release.
|